| Direct Numerical Simulation of Spanwise Rotating
Channel Flow and Heat Transfer |
.........................Li Guangxi, Tao Wenquan, Li
Zengyao,et al (441) |
| Study on Tip Clearance Flow of Turbine Blade-Endwall
Secondary Flow Structure |
.............................................Qi
Mingxu,Feng Zhenping (445) |
| Experimental Investigation of Two-Phase
Countercurrent Flow Limit in Hydrogen Thermosiphon Loop of Cold Neutron Source |
.......................Du Shejiao, Bi Qincheng, Chen
Tingkuan,et al (450) |
| Hydrogen Production from Co-Gasification of Coal and
Biomass in Supercritical Water by Continuous Flow Thermal-Catalytic Reaction System |
.......................Yan Qiuhui, Guo Liejin, Liang
Xing, et al (454) |
| Study on Combustion Characteristics of a
Direct-Injection Engine Fueled with Liquefied Petroleum Gas/Diesel Blends |
....................Qi Donghui, Liu Shenghua,Gong
Yanfeng,et al (458) |
| Numerical Calculation of Gas Flows in High
Temperature Ceramic Filters |
.....................Hui Jing, Xu Tingxiang, Zhang
Lite,et al (463) |
| Experimental Investigation to the Heat Transfer
Characteristics of Water in Vertical Pipes Under Supercritical Pressure |
.......................Xu Feng, Guo Liejin, Mao Yufei,
et al (468) |
| Simulation of Gas-Solid Flow in Slug Coolers of
Circulating Fluidized Beds |
.....................Xu Yongquan, Li Yongxing, Yang
Dong, et al (472) |
| Experimental Study on Mechanical Performance of
Expansion Turbine with Aerodynamic Bearings |
......................Hou Yu, Lin Shaoning, Chen
Chunzheng, et al (476) |
| Dynamic Characteristics of Air-to-Water Heat Pump
Under Frosting/Defrosting Conditions |
..........................Ji Changfa, Huang Dong, Yuan
Xiuling (480) |
| Two-Stage Structural Damage Detection Method with
Genetic Algorithms |
...........................Guo Huiyong, Zhang Ling,
Jiang Jian (485) |
| Optimum Design of the Mechanical Press with
Low-Speed and Stamping-Punch Mechanism Based on Genetic Algorithm |
.......................He Yupeng,Zhao Shengdun,Yang
Hui,et al (490) |
| Wavelet Construction Based on Lifting Scheme and
Incipient Fault Feature Extraction |
...............Jiang Hongkai, He Zhengjia, Duan
Chendong,et al (494) |
| Realization of Virtual Diagnosis Center for Machine
Fault with Open Structure |
..............................Liu Dan, Xu Guanghua, Hou
Chenggang (499) |
| Fast Adaptive Trans-Propagation Least Mean Square
Algorithm Based on Principle of Alternative Projection |
................................Wang Teng, Yan Guirong,
Zhang Xinwu (503) |
| Image Segmentation Algorithm Based on Boltzmann
Theory |
.................................Zhuang Jian, Yu Qing,
Wang Sun¡äan (507) |
| Performance of Photocatalytic Hydrogen Production by
Splitting Water over Metal-Loaded Crª2Oª3-TiOª2 Catalysts |
.......................Xing Chanjuan, Yan Wei, Zhang
Yaojun, et al (511) |
| Preparation of Pt/TiO2-x Nx and Its
Photocatalytic Activity of Hydrogen Production |
...........................Yang Honghui,Yan Wei,Zhang
Yaojun,et al (514) |
| Analysis and Fuzzy Modeling of Elastic Modulus of
Microcomponent by Microcantilever Deflection |
....................Zhu Qiang, Jiang Zhuangde, Wang
Hairong, et al (517) |
| New Hybrid Optimization Method and Its Application
to Pressurized Water Reactors Reloading Optimization |
.........................................Wang Tao, Xie
Zhongsheng (522) |
| Modeling of Thermally Induced Error for
High-Precision Step Imprint Tool |
........................Yan Le, Lu Bingheng, Ding
Yucheng, et al (526) |
| Numerical Simulation on Airflow in Plenum of
Underfloor Air Supply and Experiment on Characteristics of Plenum¡¯s Outlets |
..............................Kong Qiongxiang,Yu
Bingfeng,Pan Zhen (531) |
| Relaxation Process of Sand Particles |
....................................Xu Weijiang, Che
Defu, Xu Tongmo (536) |
| Perturbation Analysis of Wall Roughness Effect on
Flow in Micro-Channel Between Two Parallel Plates |
................................Wang Haoli, Wang Yuan,
LiuJiang (540) |
|
|
|
|
