June 23 6月23日

June 23 6月23日
Individual Sessions 分组报告 15 minutes for each presentation, including 5 min. of answering questions 15分钟/篇（10分钟报告，5分钟提问）
Session 1-6	Modern Design Theory, Methodology and Techniques
8:30-10:00	Place: Venue ② 会场②
	Co-chairmen: Diao, Dongfeng 刁东风, Onuki Akiyoshi
	1-6-1 Modern Design Method in Heavy Forging Machinery Zhang Jun et al, Northwestern Polytechnical University, China 1-6-2 Tool Condition Monitoring in Turning Using Neural Network Wang Haili et al, Shanghai Jiao Tong University, China 1-6-3 Optimum Tilting Direction and Angle of Tool for Surface Roughness in Ball-End Milling Zhao Xiaoming et al, Shanghai Jiaotong University, China 1-6-4 Kinematic Principle, Construction and Characteristics Analysis of Compound Rolling Teeth Transmission Li Jianfeng et al, Beijing University of Technology, China 1-6-5 Design and Calculation of the Continuous Rolling Puncher Fu Jianhua et al, Taiyuan Heavy Machinery Institute, China 1-6-6 Flexible Dynamic Analysis and Optimal Design of a Three-Dimension, High-Speed Parallel Manipulator Zhang Minghui et al, Tianjin University, China
Session 1-7	Modern Design Theory, Methodology and Techniques
8:30-10:00	Place: Venue ⑦ 会场⑦
	Co-chairmen: Zen, Pan 曾攀, Zhan Dongan
	1-7-1 Load Character on Tooth Surface of Plate Mill Pressure Screw-Part and Cintrol Measures Chen Xiumin et al, Yanshan University, China 1-7-2 Analysis on the Olsplancement Performances of Parallel Four-Bar Flexure Hinge Mechanism Shen Jianying et al, Jiaxing College, China 1-7-3 Isometric Profile and Arc-Trilateral-Shaped Connection Between Shaft and Hub Guo Peiquan et al, Jinan University, China 1-7-4 Application of Multi-Body System in Dynamics Analysis of Railway Freight Vehicle Yang Guangwu et al, Southwest Jiaotong University, China 1-7-5 Linear Interpolating-based Fuzzy Control Ding Chengjun et al, HeBei University of Technology, China 1-7-6 A New Interpolation Method in Image Registration Based on Mutual Information Feng Lin et al, Dalian University of Technology, China
Session 2-6	Intelligent Manufacturing and Systems
8:30-10:00	Place: Venue ③ 会场③
	Co-chairmen: Cao, Binggang 曹秉刚, Wataru Natsu
	2-6-1 Numerical Simulation of Continuous Variable Cross-Section Extrusion Forming Fan Aiqin et al, University of Science & Technology Beijing, China 2-6-2 A Novel Device for Driving Micro-robots in Tubes Chen Yangzhi et al, South China University of Technology, China 2-6-3 An Integer conceptual Design system Basd on Bond Graphs Cao Dongxing et al, Hebei University of Technology, China 2-6-4 Rapid query system for products based on customers' need and method research Lv-hongyu, Hebei University of Technology, China 2-6-5 Simulation of The Particles in Powder Mixed EDM Wang Hui et al, Dalian University of Technology, China 2-6-6 Design and Simulation of Combustion Engine Rebuilding Based on Magnetic Driving Principle Zhou Qiang et al, China Agricultural University, China
Session 2-7	Intelligent Manufacturing and Systems
8:30-10:00	Place: Venue ④ 会场④
	Co-chairmen: Xue Yiqin, Meng, Yonggang 孟永钢
	2-7-1 The Influence of Complex Dynamics of Workpiece on Machining Chatter Frequency Wang Min et al, Beijing University of Technology, China 2-7-2 Project Planning for Mould and Die Virtual Enterprise Based on Negotiation Li Yingjie et al, Guangdong University of Technology,China 2-7-3 Development of The Client Tier for a Step Compliant Capp System Xu Xun et al, University of Auckland, New Zealand 2-7-4 Failure Rate Analysis Using Modeling and Simulation Jie Chen et al, Department of Mechanical Engineering, IUPUI, USA 2-7-5 Abrasive waterjet cutting of alumina ceramics with controlled nozzle oscillation Jun Wang et al, Queensland University of Technology, Australia 2-7-6 A Decision-Based Design Approach for Enterprise Driven Product Design Wei Chen, Northwestern University, USA
Session 3-5	Advanced Manufacturing Processes and Equipment
8:30-10:00	Place: Venue ⑤ 会场⑤
	Co-chairmen: Jack G. Zhou, Zhang Yongkang 张永康
	3-5-1 A New Offset Hatch Path Generation Algorithm for 3D Model Slicing in RP Zhang Jiayi et al, Shenyang Institute of Automation Chinese Academy of Sciences, China 3-5-2 DQE Measurement and Analysis of an Indirect Flat Panel Detector for X-Ray Digital Radiography Zhou Zhenggan et al, BeiHang University, China 3-5-3 The Study on Azimuthal Alignment in the Manufacturing Process of Polarization Maintaining Fiber Coupler Wang Jin’e et al, National University of Defense Technology, China 3-5-4 Rapid Development of The New Products Based on Interation of RE/RP Ma Shumei et al, Tongji University, China 3-5-5 Study on the Technique of Pulse Electrochemical Finishing in Hardened Gear Li Hongyou et al, HuaQiao University, China 3-5-6 Dynamic Investigation of a New Suspension Maintenance System for Tall Buildings Yan Shirong, Fuzhou University, China
Session 3-6	Advanced Manufacturing Processes and Equipment
8:30-10:00	Place: Venue ⑥ 会场⑥
	Co-chairmen: Shi, Tielin 史铁林, Jack Hu
	3-6-1 Processing techniques of ultra-smooth surface Guo Zhongning et al, Guangdong University of Technology, China 3-6-2 An Testing System for Measuring Multinomial Mechanical Property of Foundry Molding Sand Xie Zuxi et al, Shenyang University of Technology, China 3-6-3 The Research of Dynamic Frequency Scanning of Servo Cylinder Yi Jiangang et al, Wuhan University of Science and Technology, China 3-6-4 Digital Simulation Approach for Fuzzy Reliability of Mechanical System Dong Yuge et al, Hefei University of Technology, China 3-6-5 Investigation of Non-random Fused Deposition Modeling-Fabricated Three Dimensional Porous Structures By Designed Experiments Ang.Ker.Chin et al, Nanyang Technological University, Singapore 3-6-6 Development of a New Precision Internal Finishing Process Using a Magnetic Machining Jig Zou Yanhua et al, Utsunomiya University, Japan
10:00-10:20	Coffee/Tea Break, 休息
Session 1-8	Modern Design Theory, Methodology and Techniques
10:20-12:00	Place: Venue ② 会场②
	Co-chairmen: Jie Luo, Zhang, Guangjun 张广军
	1-8-1 A Robust Point Maching Algorithm Based on Improved Particle Swarm Optimizer Feng Lin et al, Dalian University of Technology, China 1-8-2 Optimization on the Skirt Supporting Zone of Hydrogenation Reactor Gao Bingjun et al, Hebei University of Technology, China 1-8-3 Three Dimension Contact Analysis of WN Gears Using Finite Element Method Chen Dianhua et al, Dalian University, China 1-8-4 Study ing the application of TRIZ to Fuzzy Front End Tan Runhua, Hebei University of Technology, China 1-8-5 Study on Conceptual Design Process Model Based on Axiomatic Design,Function Basis and Effect Cao Guozhong et al, Hebei University of Technology, China 1-8-6 Study on Mathematical Model and Numerial Simulation of Elastic Problem in Mulltipeint Binder Wu yousheng et al, Huazhong University of Science and Technology, China
Session 1-9	Modern Design Theory, Methodology and Techniques
10:20-12:00	Place: Venue ⑦ 会场⑦
	Co-chairmen: Wei Chen, Zhao, Wanhua 赵万华
	1-9-1 On the Diamond Thin Films with Different Tungsten Carbide Substrates Chen Ming et al, Shanghai Jiao Tong University, China 1-9-2 The Method to Identify Bar-Crossing in Mutiple- Joint Kinematic Chain With Mutiple Bars and Loops Song Li et al, Xiangtan University, China 1-9-3 The Analysis of 2002 Chinese Inventive Patent Based on Triz Zhang Jianhui et al, Hebei University of Technology, China 1-9-4 Dynamic Scheduling Model in Multi-Product Batch factories Wang Fengying, Wuhan University of Science & Technology, China 1-9-5 Optimum Efficiency of U-Shaped Flexible Production Line (U-FPL) Lin Fang et al, South China University of Technology, China 1-9-6 Topology Optimization of Compliant Displacement Amplifier Mechanism for Piezoelectric Actuators Zhang Xianmin et al, South China University of Technology, China
Session 1-10	Modern Design Theory, Methodology and Techniques
10:20-12:00	Place: Venue ③ 会场③
	Co-chairmen: Jie Chen, Tong, Jin佟金
	1-10-1 Mesh Analysis and Experimental Investigation of an Involute Cylindrical Worm-Helical Gear Drive Su Daizhong et al, Chonqing University, China 1-10-2 A Concurrent Engineering-Oriented Design Database Representation Model Xue Deyi et al, University of Calgary, Canada 1-10-3 A Design and Analysis Model for Duel-Clutch PowerShift Transmission Zhang Yi et al, University of Michigan-Dearborn, USA 1-10-4 Development of Reliability Assessment and Filure Mode Analysis Program for Machine tool Lee Soo-Hun et al, Ajou University, Korea
Session 1-11	Modern Design Theory, Methodology and Techniques
10:20-12:00	Place: Venue ④ 会场④
	Co-chairmen: Xu Xun, Du, Fengshan杜凤山
	1-11-1 Control of a Time Delay System Using Neural Prediction and Gain Scheduling Xue Yiqin, Cardiff University, UK 1-11-2 Design For Patentability Khong PohWah, Nanyang Technological University, Singapore 1-11-3 Monitoring of Drill Wear Using Neuro-Fuzzy Systems Tien-I Liu et al, California State University, USA 1-11-4 Nanohole Fabrication Using Top Down Manufacturing Methods for Biomedical Applications Jack G. Zhou et al, Drexel University,USA 1-11-5 Technological Enablers for Sustainability in Product and Process Design G. Seliger et al, Technical University Berlin, Germany 1-11-6 Soft-Pad Grinding of 300 mm Wire-Sawn Silicon Wafers: Effects of Soft Pad Parameters Pei Z.J. et al, Kansas State University, USA
Session 2-8	Intelligent Manufacturing and Systems
10:20-12:00	Place: Venue ⑤ 会场⑤
	Co-chairmen: Qu Jun, Jia, Zhenyuan 贾振元
	2-8-1 Study on Different Local Wear Ratio along Flushing Flow in EDM Wataru Natsu et al, Tokyo University of Agriculture & Technology, Japan 2-8-2 Research on Energy Distribution into Two Electrodes in EDM Process Wataru Natsu et al, Tokyo University of Agriculture and Technology, Japan 2-8-3 Integrated Framework of Adaptable Vehicle Development Process Wang Hao et al, Shanghai Jiaotong University, China 2-8-4 Theoretical Analysis and 3d Simulation of A Worm-Gear Drive with Involute Tooth Profiles Zhan Dongan et al, The Nottingham Trent University, UK 2-8-5 Reconfigurable 3D Precision Optical Measurements Zhenhua Huang et al, University of Michigan, USA
Session 3-7	Advanced Manufacturing Processes and Equipment
10:20-12:05	Place: Venue ⑥ 会场⑥
	Co-chairmen: Gao,X.R, Liu, Xiongwei 刘雄伟
	3-7-1 Machining of elastomers Jie Luo et al, University of Michigan, Ann Arbor, USA 3-7-2 The Research of Super Slow-Speed Bend Tester for Ceramic Testing Under High-Temperature Onuki Akiyoshi et al, Yamagata University, Japan 3-7-3 Advances in Laser Forming Research Y.Lawrence Yao et al, Columbia University, USA 3-7-4 Feedrate Scheduling for High Speed Milling Based on an Improved Cutting Force Model Han Ul Lee et al, Pohang University of Science and Technology, South Korea 3-7-5 Cracking Analysis and Control in Rapid Manufacturing of Metal Compiments with Laser Cladding Song Jianli et al, Shanghai Jiaotong University, China 3-7-6 Basic Deformation Features of NC Bending Process of Stainless Steel Tube Zhan Mei et al, Northwestern Polytechnical University, China 3-7-7 Modes of Material Deformation in Differential K. L. Schlemmer et al, University of Bath, UK
12:00-13:30	Lunch 午餐
13:30-16:00	Visiting Shaanxi History Museum 参观陕西历史博物馆 It is a magnificent architectural complex in the Tang-dynasty style which collects the highlights of the Shaanxi culture and shows the development of the Chinese civilization. 中国第一座拥有现代化设施的大型国家级博物馆, 精美的中国唐朝建筑风格博物馆，收藏陕西历代珍贵文物。
16:00-18:00	Visiting Xi’an Jiaotong University 参观西安交通大学 Xi’an Jiaotong University was founded in 1896 which has the feature of science and Engineering and covers 9 subjects such as science, engineering medicine, economics, management, art and law. 西安交通大学是建校106年的高等学府, 是一所具有理工特色，涵盖理工医经管文法等 9 个学科门类的综合性大学。
18:30-21:00	Banquet, Promulgating Best Papers Award and Best NSFC Project Award Announcing Organizing University of The 7th ICFDM 宴会，颁布优秀项目和优秀论文，公布下一届（第7届）承办会议单位

Zhang Jun et al, Northwestern Polytechnical University, China

Chen Xiumin et al, Yanshan University, China

Feng Lin et al, Dalian University of Technology, China

Fan Aiqin et al, University of Science & Technology Beijing, China

Wang Min et al, Beijing University of Technology, China

Yan Shirong, Fuzhou University, China

Zou Yanhua et al, Utsunomiya University, Japan

Feng Lin et al, Dalian University of Technology, China

Zhang Xianmin et al, South China University of Technology, China

Lee Soo-Hun et al, Ajou University, Korea

Xue Yiqin, Cardiff University, UK

Jack G. Zhou et al, Drexel University,USA

Wataru Natsu et al, Tokyo University of Agriculture & Technology, Japan

Jie Luo et al, University of Michigan, Ann Arbor, USA

K. L. Schlemmer et al, University of Bath, UK